Full VPN Setup For Windows : IKEv2 Protocol

Setup IKEv2 on MS Windows 7, 8, 10
Note: Screenshot are from Windows 10 but similar settings are for 7 and 8.
 
1 Open Network and Sharing Center and click on Set up a new connection or network.

Windows-IKEv2-01.jpg
 
2 Select Connect to a workplace and then click on Next.

Windows-IKEv2-02.jpg

3 Click on Use my Internet connection (VPN).

Windows-IKEv2-03.jpg
 
4 Enter the server address as Internet Address (Click here to find our VPN Server List) and Destination name. Check Remember my credentials and click on Create.

Windows-IKEv2-04.jpg
 
5 Open the Network and Sharing Center and click on Change adapter settings.

Windows-IKEv2-05.jpg

6 Click with right on the VPN network adapter and then click on Properties.

Windows-IKEv2-06.jpg

7 Switch to the tab Security, select Type of VPN IKEv2 and take over the settings from the screenshot. Then click on OK.

Windows-IKEv2-07.jpg
 
8 Select the VPN connection and click on Connect.

Windows-IKEv2-08.jpg
 
Windows-IKEv2-09.jpg
 
9 Enter your credentials and click on OK.

Windows-IKEv2-10.jpg
 
10 If connection has been successfully established, it displays Connected.

Windows-IKEv2-11.jpg
 
12 Check your public IP address on https://myip.expert 
 

Have more questions? Submit a request

Comments

Powered by Zendesk